Product assembly video: show how the parts join

Turn the current manual and assembly sequence into a narrated product assembly video. Show the parts, move in on the important connection and finish on the assembled product, ready for customers to recognize.

Starting prompt

Edit this if you like, or open it in ngram and add your source there. You’ll review the brief and settings before creating.

Video generation uses credits. Review your estimate in ngram. MP4 downloads require Basic or higher.

How credits work

Trusted by teams at

A side table assembled in six figures

An independently illustrated assembly follows IKEA LACK manual AA-2544912-1: parts, foot plugs, screws, attached legs and the finished upright table.

“The drawing shows the parts. Which way does this one go?”

Identify
A customer opens the box and finds several similar components. The manual names them, but the customer still has to match each drawing to the part in front of them.
Orient
The next drawing changes the viewpoint. The customer turns the component around, trying to work out which end should meet the product and which end should remain visible.
Connect
A small joint carries the important instruction. A wide product image makes it hard to see where the connector starts or which component turns.
Repeat
The first connection is understood, but the remaining sequence is unclear. The customer needs to know what repeats and what has already been completed.
Check
The finished product looks familiar, but the instructions still need a clear final state and the applicable limits. Keep those details with the explanation customers receive.

Give the assembly a visible sequence

The old way

Before ngram

The ngram way

After ngram

Separate diagrams leave the viewer to imagine the movement between the starting and finished positions.

Show the initial orientation, move the component into place and hold the completed connection before continuing.

A distant shot can hide the connector that explains how two parts fit.

Use a labeled close view for the important joint, then return to the wider assembly so the viewer stays oriented.

An old instruction video can keep circulating after a component or manual changes.

Keep the instruction version with the brief. Revise the affected sequence and review the new result against the current manual.

Start with the assembly you need to explain

Use the current instructions or describe an approved procedure. Name the product version and the connection viewers need to understand.

1Manual

Bring the manufacturer instructions

Attach a permitted manual or give its public URL. Name the assembly section, parts and order to preserve, including any limits the viewer needs beside the final product.

Turn a manual into video

2Written sequence

Describe the approved joining order

Write the starting parts, their orientation and each connection in order. Add reference images when useful, and identify any facts ngram should ask about rather than infer.

Start from written instructions

ngram

A narrated illustration of your assembly

ngram plans the explanation and creates labeled motion. Check the parts and connections against your source, then revise the detail that needs work.

technical animationvoiceovermotion graphics

Make the connection understandable

Give the joint its own close view

Show where the connector starts, which part moves and how the joined pieces should look. Keep the surrounding assembly visible so the close view has a place in the sequence.

Keep repeated connections clear

Explain one joint in detail, then show how the remaining connections follow. Retain the correct number of parts as the product comes together.

Keep instructions with the version

Use the applicable manual as the factual source. Compare the plan and finished animation with it before putting the video on a product or support page.

From instructions to an assembly explanation

Define the product and sequence

Source

Give the current manual, audience, parts and joining order. Ask for a close view of the connection customers need to understand.

Plan the technical illustration

Plan

Choose Machine anatomy with Opus 5.5. Voice Auto and Presenter No avatar are recommended. Review the proposed order and narration before approving production.

Watch the joints form

Review

Check part counts, orientation, joining order and the final state. Request corrections in the project, then inspect the completed MP4 before distribution.

Create an assembly video

Build the assembly explanation

Explore all features

01 / 08

Technical Animation

Show the part that makes the joint work

Use labeled technical illustrations and motion to explain the assembly. Describe how the components should relate, and compare the generated movement with the product instructions.

Learn more about Technical Animation

02 / 08

AI Voiceover

Name the part as the viewer sees it move

Narrate the joining order in language your customer understands. Review component names and pronunciation alongside the movement so the spoken instruction refers to the visible part.

Learn more about AI Voiceover

03 / 08

Captions

Keep the instruction readable with sound off

Enable captions when customers need them. Check their position so they do not cover the connector, part label or finished joint the viewer needs to inspect.

Learn more about Captions

04 / 08

Brand Kit

Give the instruction your product identity

Select your configured Brand Kit before creation. Keep the instruction clear while using the logo, colors and type that connect this video to the correct product documentation.

Learn more about Brand Kit

05 / 08

Video Editing

Correct the particular step that changed

Request a revision with the affected scene and source instruction. State which component should change and what should stay, then review the revised transition as well as the joint.

Learn more about Video Editing

06 / 08

Motion Graphics

Direct attention to the joining point

Use labels and callouts to identify the connector and direction of movement. Leave enough space around the joint for customers to follow the action before the next step begins.

Learn more about Motion Graphics

07 / 08

Script Generation

Turn the assembly sequence into narration

Give ngram the approved parts and order. Read the planned script for missing prerequisites, confusing references and instructions that the accompanying visual will need to make explicit.

Learn more about Script Generation

08 / 08

Video Hosting

Put the explanation beside the instructions

Share the reviewed video where customers look for setup guidance. Keep the product version and manual link with the video so viewers can choose the instructions for their item.

Learn more about Video Hosting

Teach the task around the assembly

View all use cases

Build a practical training module

Place the assembly sequence inside a larger lesson when learners also need preparation and a task to practice. Keep this short explanation focused on the parts and joints.

Learn more

Answer a setup question

Use a focused support video for the connection customers repeatedly ask about. Keep the product version and applicable instructions close to the answer.

Learn more

Bring the current instructions

ManualVideo

Use the manual as the factual starting point. Select the assembly sequence and keep the version, component names and relevant limits together in the brief.

Convert Manual to Video

Watch components working together

All examples

Study labeled mechanical explanations

See how the gallery uses cutaways, movement and labels to make internal relationships visible. Choose the assembly example when you want to inspect the joining sequence.

See the example

Start with an assembly brief

All templates

Reuse the parts-to-finished-product structure

Fill in the product, manual and ordered connections. The template supplies a starting brief and a real example, then leaves the product-specific decisions to you.

Use this template

Will it work for my situation?

How do I create a product assembly video?

Start with the current instructions, the parts and their joining order. In ngram, use Machine anatomy with Opus 5.5 for a labeled illustration. Review the plan and finished movement against the manual before sharing.

What should an assembly instruction video show?

Show the starting parts, orientation, joining order and finished state. Give the important connection a close view, explain what repeats and retain the manufacturer’s relevant limits.

Can I make an assembly animation from a PDF manual?

Yes. Attach the permitted PDF or give its public URL, then identify the product version and steps to illustrate. The [assembly template](/templates/product-assembly-video) provides a reusable brief.

What if the assembly must preserve my CAD geometry?

Use a model-based workflow when the deliverable must retain the exact engineering model. Machine anatomy creates an explanatory illustration from your brief and references. Export permitted views or footage from the model-owning tool when those are the right source.

How do I revise a wrong connection?

Name the scene, component and correct instruction in the project. Explain what should change and what should remain, then inspect the revised joint and adjacent steps. The [technical-animation guide](/docs/create-a-technical-animation) covers the Studio workflow.

Show customers how the parts join

Bring the current instructions and the connection your customer needs to understand.