Music to Video for giving an original track a visual world
Bring a track you have permission to use and define the story or campaign it should carry. Build a complete visual direction around the music, then prepare full-length and short versions as separate reviewed edits.
Trusted by teams at
How it works
Four steps from a piece of music to a posted video.
No editing suite, no hand-keyframing a visualizer, no scene-by-scene timeline work. Drop the music, approve the storyboard, export a branded video for every feed.
Drop the music in
MP3, WAV, M4A, AAC, OGG, or FLAC up to 500 MB. Works on a finished track, a loop, or a beat. Paste lyrics for on-screen lines, or hand over a hook and let ngram generate a vocal when you only have the instrumental.
ngram reads the beat
Tempo, downbeats, sections, and energy shifts come back as a timeline. The intro, the build, the drop, and the breakdown become marked moments the storyboard cuts against.
Visuals get matched to the music
The agent maps each section to a scene: a reactive visualizer, AI imagery, motion text, or photomotion stills, with cuts that land on the beat, then stamps your colors, logo, and fonts on every frame.
Render and post
Review the music video for its intended channel, including the crop and caption placement, then export one MP4 from Studio. Prepare and review another aspect ratio as a separate edit.
Output controls
Smart defaults for a track. Real knobs when you want them.
Cuts that land on the beat
Review scene timing against the track's downbeats and section boundaries. Move cut points in the editor when a drop needs a hard cut or a breakdown needs more room.
A visualizer that reacts
Generate a reactive visualizer that moves with the frequencies and the energy of the music, layered behind scene art rather than running as a flat waveform over a still.
Lyric or hook lines on screen
Paste the lyrics and ngram times them to the vocal, styled by your brand kit. Run a full lyric video, a single hook line per section, or no text at all, per render.
Scene art per section
AI imagery, photomotion stills, and motion backgrounds swap as the energy shifts, so the quiet intro and the peak chorus never share the same wallpaper.
Prepare each channel edit separately
Set the intended channel and aspect ratio for the music video, then review the crop, caption placement, and CTA before exporting one MP4. Prepare another channel version as a separate edit.
Cut a beat-drop teaser
Pull a 15 to 30 second window around the drop and export it as a standalone vertical clip for a pre-release tease, same visuals, same branding.
Cover art carries through
Feed in the artwork and ngram pulls its palette into the scene colors and the intro card, so the video reads as part of the same release as the track.
Your files stay in your workspace
Master files and renders stay in your workspace and you can delete your account and data anytime from Settings. Talk to sales about access controls for your team.
The rest of ngram
Music to video is the front door. These run the rest of the production.
Edit the music-led cut
Use the timeline and canvas to arrange scenes around the uploaded track, adjust the audio mix, and finish the music-led video as one MP4.
Learn moreMotion Graphics
Reactive backgrounds, beat-triggered text hits, and animated callouts that pulse with the energy of the track, so a drop reads on screen even before the bass arrives.
Learn moreAI Visuals
Scene-matched imagery generated to fit the mood of each section, so an ambient intro gets one look and a peak chorus gets another instead of one static backdrop under the whole track.
Learn moreCaptions
Burn the lyric or hook line onto the video, timed to the vocal and styled by your brand kit. The text holds the message in a muted feed where most music scrolls past with the sound off.
Learn moreBrand Kit
Logo, colors, fonts, and an intro and outro card applied across every scene, so each beat or single a producer ships looks like it came from the same shop, not five different editors.
Learn moreConvert the finished music-led video
Download the music-led video from Studio as one MP4 first. If the next system needs MOV, WebM, or MKV, send that file through Video Converter in a separate one-file, one-output job.
Learn moreUse cases
Where a music-driven video earns its place.
One beat becomes a week of short-form
Turn a single track into vertical hook clips for Reels, Shorts, and TikTok, each cut around a different section, so a beat drop can post for days instead of once.
See use caseA watchable upload for the track
Give a beat or instrumental a real YouTube home with a reactive visualizer and scene-matched art, so listeners stay on the page instead of bouncing off a static loop.
See use caseDrop-day posts across every feed
Ship the release announcement as branded video for each channel, all carrying the same artwork palette. Prepare and review each channel edit separately before exporting one MP4.
See use caseScore a campaign in your colors
Pair a licensed or original track with brand visuals for a launch reel or ad bed. Review the scene pacing against the music, then apply the Brand Kit across the video.
See use caseMusic-led ads that stop the scroll
Build paid-social creative around a licensed track and a clear hook line. Review the scene pacing and prepare each channel edit separately before exporting one MP4.
See use caseTease the drop before it lands
Cut a 15-second snippet around the loudest section into a countdown teaser, branded and vertical, to warm up the feed in the days before the track goes live.
See use caseScore a brand post with your track
Marketers set an original or licensed beat under a captioned LinkedIn video so the post earns the algorithm's video boost and the audio sets the tone in the first second.
See use caseMusic-led clips for paid and organic
Growth teams can use one licensed track across on-brand vertical clips. Prepare, caption, and review each social-calendar edit separately.
See use caseOther converters
Coming from a different source? There's a converter for that.
Same read-the-source then storyboard pipeline, different inputs. Music to video shares the brand kit, render stack, and security model with every other ngram converter.
The release-day cousin. Tuned for a finished single with vocals and lyrics, where the verse and chorus structure leads, rather than a beat or instrumental.
Open converterStart from the artwork instead of the track. Apply cinematic motion to a still and pair it with the music for an artwork-led visual when you want minimal scenes.
Open converterTools that pair with this converter
Sharpen the track. Edit the video.
Polishing the source track
Clean the music before the storyboard runs
Background Noise from Audio
Strip hiss and room tone from a rough home recording so the track reads clean once it carries a full music video instead of a streaming waveform.
Open toolAdd Music to Video
Already have the footage and just need the track under it? Lay your music onto an existing clip instead of building the video from the beat up.
Open toolAudio to Text
Transcribe the vocal on its own when you have no clean lyric sheet, then drop the text back into the converter as the on-screen lines.
Open toolAI Voice Generator
Only have an instrumental and a written hook? Generate a vocal take first, then feed that audio back into music to video to build the scenes.
Open toolEditing the rendered video
Take the music video further
Video Editor
Open the rendered music video on a real timeline to nudge a cut onto the downbeat, swap a visual, or reposition a hook line before you publish.
Open toolVideo Cutter
Pull the 15 to 30 second drop window out as a standalone teaser clip without re-rendering the whole music-driven video.
Open toolAdd Subtitles to Video
Burn or export lyric subtitles in any language for a cut headed to a muted feed or an international fan base.
Open toolVideo Compressor
Shrink the final render for a platform upload cap or a fast email embed without dropping it to a visibly lower quality.
Open toolGenerating from scratch
If you don't have finished music yet
AI Video Generator
Prompt a short clip when you want bespoke footage for a section the scene art can't cover, then drop it into the track's storyboard.
Open toolImage to Video
Animate the cover art or a press photo into a moving scene, then let music to video sequence it against the beat.
Open toolAI Image Generator
Generate on-brand scene art ahead of time, in the palette of the artwork, so each section of the video has the visual you want.
Open toolAI Avatar Video Generator
Add a presenter intro or outro to the music video when a release needs a quick on-camera note before the track plays.
Open toolBuilt for teams
Who reaches for music to video?
Content Creators
Use a beat or track as source material for a YouTube video and vertical clips. Prepare and review each cut separately so the release can support the feed for days.
See workflowsGrowth Marketing
Run paid social with video built around a licensed track and a clear hook line. Review the scene pacing and caption treatment before export.
See workflowsProduct Marketing
Score a launch reel or brand anthem with a chosen track, review the scene pacing against the music, and apply the Brand Kit across every frame.
See workflowsAgencies
Spin up music videos for every artist or brand client from their own master files, each one styled in that client's palette and logo.
See workflowsFounders
Set a recognizable track under a sizzle reel or announcement and ship it branded before the next standup, no editor in the loop.
See workflowsSolopreneurs
Hand off the whole music video step: upload the track, approve the storyboard, and post a finished video without learning an editing suite.
See workflowsIntegrations
Triggers, not logos. Wire music to video into the tools you already run.
Each integration ships with a working template tuned for music and release workflows. Start from one, or build your own with the REST API and self-managed webhook subscriptions for video.completed or video.failed.
whenAn approved music track is ready for a Studio upload
thenUpload the file in Studio; use Zapier's documented Create Video or Get Status action for this Music to Video job, then pass the result to the next step.
whenAn agent has an approved music and a video brief
thenUpload the file in Studio; use MCP's documented create and status tools for this Music to Video job, then return the status or result to the agent.
whenYour workflow has an approved music ready for Studio
thenUpload the file in Studio; use n8n's documented Create From Text, Create From URL, or Get Status node for this Music to Video job, then pass the result onward.
whenYou hit 'Convert to video' on a music file open in your browser
thenGet one branded music-video draft back in a new tab for pacing review
whenThe video from your music is ready for YouTube Social Publishing Beta
thenVerify the YouTube destination for the approved music video, then publish it now.
whenThe video from your music is ready for LinkedIn Social Publishing Beta
thenCompose the LinkedIn post for the approved music video, then publish it now.
How it compares
If you've been using something else to turn music into video.
Freebeat and Revid beat-sync stock or generated clips to your track. Neural Frames renders an AI visualizer from a prompt. ngram lets you choose the music, review scene pacing, add lyric or hook lines, and apply your Brand Kit before rendering one MP4.
| Feature | ngram | Freebeat | Revid | Neural Frames |
|---|---|---|---|---|
| Music choice and scene pacing | Choose the track, then review and revise scene pacing before render | Beat-synced clip cuts | Beat-synced clip cuts | Audio-reactive only |
| On-screen lyric or hook lines | Timed to the vocal, brand-styled, toggleable | Lyric captions | Lyric captions | Limited |
| Brand kit applied automatically | Logo, colors, fonts, intro and outro on every render | No | No | No |
| Channel-specific editing workflow | One reviewed MP4 per channel-specific edit | Square or vertical resize | Square or vertical resize | One ratio per export |
| Cut a teaser clip from the same video | Pull a 15 to 30 second drop cut on its own | Manual re-trim | Manual re-trim | Separate render |
| Same pipeline for non-music sources | Shared with text, URL, PDF, audio, and screen recording converters | Music only | Music only | Music only |
| Max input file size | 500 MB per file | Varies by plan | Varies by plan | Varies by plan |
| API and webhooks | REST API with self-service API keys; webhook subscriptions for video.completed or video.failed; MCP, Zapier, and n8n for documented workflows | None | API on paid | None |
FAQ
Common questions about music to video
Still curious?
Music → Video
Ready to turn your music into a video people will actually watch?
Upload the track, review the storyboard and scene pacing, then export one branded MP4 for the channel you choose. Prepare other channel edits separately.