Manufacturing product demo video template

Show how your product supports a real manufacturing workflow. Use your product page or recording to connect the feature to work on the factory floor.

See it in action with UltiMaker Cura print preparation.

From this input to this video

A walkthrough of Cura’s documented slicing workflow using official product images and labeled diagrams.

Create a 30-second product demo video for UltiMaker Cura, a 3D-printing slicing software for product-development and manufacturing teams preparing 3D prints. Open with the operational problem: turning a 3D model into printer-ready instructions with the right settings. Then walk through the slicing workflow and recommended print profiles described on the official Cura page solving it, using the actual product images and guidance on https://ultimaker.com/software/ultimaker-cura/ to show the real product — do not invent fictional screens or hardware. Tone: clear and technical without jargon. End on the logo with the line Explore UltiMaker Cura. Voiceover language: English; if no voiceover, use on-screen captions and background music only. Use original product imagery for any interface or hardware shown, with labels and highlights. Keep illustrative diagrams visually distinct from the real product; do not invent product screens, data or capabilities.

What you start with
What you get
Drag to compare
Open video in a new tab
Read the exact input

Prompt

Create a 30-second product demo video for UltiMaker Cura, a 3D-printing slicing software for product-development and manufacturing teams preparing 3D prints. Open with the operational problem: turning a 3D model into printer-ready instructions with the right settings. Then walk through the slicing workflow and recommended print profiles described on the official Cura page solving it, using the actual product images and guidance on https://ultimaker.com/software/ultimaker-cura/ to show the real product — do not invent fictional screens or hardware. Tone: clear and technical without jargon. End on the logo with the line Explore UltiMaker Cura. Voiceover language: English; if no voiceover, use on-screen captions and background music only. Use original product imagery for any interface or hardware shown, with labels and highlights. Keep illustrative diagrams visually distinct from the real product; do not invent product screens, data or capabilities.

Selected style

Exploded view

Source material

Read the video transcript

Every print starts with the same job: turning a 3D model into printer-ready instructions, with the right settings. UltiMaker Cura handles it. Load your model, then choose your printer and material. Pick a recommended profile, tested for thousands of hours, or an intent profile for your application. Click Slice, and Cura's open-source engine builds every layer. Need more control? Custom mode offers over four hundred settings. Explore UltiMaker Cura.

Make it yours

Fill in your details here, or continue and finish your brief in ngram.

Help filling in your brief
[product-name]
Your product name.
[product-category]
What it is, in plain words.
[audience]
Who it is for.
[pain-point]
The operational problem you open on.
[key-feature]
The one feature or capability you demo.
[input-type]
What you are attaching.
[tone]
Voice and feel.
[cta]
Closing line.
[vo-language]
Narration language.

Trusted by teams at

HubSpotDeelZapierITVVeevaDP WorldGenpactSafetyCulture

What this template is

A manufacturing product demo video template is a reusable prompt plus scene structure that turns a product URL or screen recording into a short, narrated demo of one feature or capability. It covers industrial software (ERP, MES, predictive maintenance, GTM intelligence), hardware products (robots, modular equipment), and factory-floor apps. ngram handles the structure — operational hook, feature walkthrough, outcome shot, CTA — so a marketer or founder only fills in the product, the problem, and the feature, then generates.

industry: manufacturingjob: product demoaudience: marketers
Scene structure

What the template builds

Four beats, 30 seconds — the shape that manufacturing demo prompts converge on.

  1. 1

    Operational hook

    6s

    Name the factory-floor or operational problem before any product appears. Text-forward, no UI yet. Grounds the viewer in a cost or risk they recognize.

  2. 2

    Feature walkthrough

    16s

    Cut to the real screen recording or product footage. Narrate the single feature that addresses the problem, step by step, with on-screen callouts highlighting the relevant UI elements or hardware behaviors.

  3. 3

    Outcome shot

    5s

    Show the result the feature produces — a number, a dashboard state, or a physical outcome. One concrete win, nothing vague.

  4. 4

    Logo + CTA

    3s

    Land on the product logo and the closing line. Minimal, confident.

Customize

Make it yours

Duration

Adjust the walkthrough beat for a teaser, standard demo, or deep dive.

15s30s60s

Narration

AI voiceover for sales and web, captions-only for feed autoplay.

AI voiceoverCaptions + musicNo audio

Style

Visual treatment around the recording or product footage.

MinimalistMotion-graphicsRealistic

Aspect ratio

Match the channel you are posting to.

16:9 website/YouTube9:16 Reels/Shorts1:1 LinkedIn feed
Variations

Common variations

15-second teaser for LinkedIn

Hook-only cut for pre-launch awareness. Skip the outcome beat; cut the walkthrough to one step.

tweak

Reduce to 15 seconds. Keep the operational hook and one feature step only. End on the logo and product URL.

60-second deep demo

Walk through two or three capabilities for a sales or procurement audience that needs more proof.

tweak

Extend to 60 seconds. Demo [key-feature] plus two supporting features or workflow steps. Add a short narrated intro naming the product category.

Captioned-only cut for feed autoplay

Most industrial LinkedIn content plays muted. This cut removes voiceover and relies on captions.

tweak

Remove the voiceover. Use concise on-screen captions in a clean sans-serif and light background music only.

Hardware product demo

For physical products — robots, machines, modular equipment — swap the screen recording slot for product footage or a product page URL.

tweak

Replace [input-type] with 'my product page URL'. Generate B-roll visuals from the page imagery. Keep the four-beat structure.

How it works

How it works

1

Open the template

"Use this template" drops you into the ngram editor with the prompt prefilled.

2

Add your details

Replace the brackets with your product name, pain point, and feature. Attach your screen recording or product URL.

3

Approve the plan, then refine

Review the proposed plan and its script, then approve it to create your video. Preview the result and ask ngram to adjust the pacing, visuals or narration.

More templates

Related templates

All templates
Ship it anywhere

Wire demos into your stack

Triggers, not logos — connect demo creation to the tools your team already uses.

YouTube
Social Publishing Beta

whenThe finished manufacturing product demo is ready for a product-channel upload

thenVerify the YouTube destination before composing the manufacturing product demo post.

Integrate with YouTube
LinkedIn
Social Publishing Beta

whenThe finished manufacturing product demo is ready for a buyer-facing LinkedIn post

thenVerify the LinkedIn destination before composing the manufacturing product demo post.

Integrate with LinkedIn
Zapier
Automate

whena new product version ships

thenauto-render a demo and notify the sales team

Integrate with Zapier
n8n
Self-host

whena webhook fires from your product

thengenerate a demo in a self-hosted workflow

Integrate with n8n
Chrome extension
Capture

whenyou capture a screen recording of the product UI

thenstart a demo directly from the browser

Integrate with Chrome extension
REST APIMCP serverWebhooksBuild your own integration in ~30 lines.

Frequently asked

Do I need a screen recording to use this template?

A screen recording gives the best results because the walkthrough beat follows your actual UI. If you only have a product URL, paste it instead — ngram fetches the page content and generates visuals from it.

Can I demo a physical hardware product, not software?

Yes. Replace the [input-type] slot with your product page URL or any uploaded product imagery. The template's four-beat structure — hook, feature walkthrough, outcome, CTA — applies to hardware and robotics just as well as to software dashboards.

What if my product targets a non-English market?

Set [vo-language] to your target language. ngram generates voiceover and captions in any language its AI voices support. For the Central Asia or regional garment-factory market, set the language explicitly and specify the regional voice style in the tone slot.

Can I demo more than one feature in 30 seconds?

The 30-second template is deliberately single-feature — it converts better because the viewer follows one clear arc. For two or three capabilities, use the 60-second deep-demo variation.

What aspect ratio does this produce?

16:9 by default. Switch to 9:16 or 1:1 before generating, or use the vertical Reels variation after the first draft.

How is a manufacturing demo different from a generic SaaS demo?

The hook names an operational or factory-floor cost rather than a software workflow pain. The callouts reference machine states, order visibility, or risk scores rather than SaaS UI patterns. The tone skews more technical and precise. Everything else — structure, slots, render pipeline — is the same.

Use the manufacturing demo template now.

Copy the prompt, add your details with your product and feature, and generate.

Talk to sales